Altteknologia Varma Aero-Fungo-Senakviga Senakva Sekigilo

Altteknologia Varma Aero-Fungo-Senakviga Senakva Sekigilo

Mallonga priskribo:

The working principle of heat pump drying machine: untilize refrigerant compression through the compressor to form the high temperature and high pressure gas.The gas went into the condenser to release heat, the heat will be sent into the chamber by the circulating fan , to heat the air in the chamber(The maximum air temperature up to 75 ). Then the air temperature rises, the moisture in the drying material will gradually evaporate, and then exhaust of the moisture by the fresh air dehumidification system,to achieve the drying effect.

Modelnumero: DPHG150S-PS-P

Produkta Detalo

Produktaj Etikedoj

1.Supraj datumoj estas sub la testo: Ekstera unuo ĉe aera temperaturo 20 ° C,enira aero sekigas ĉiujn 15 ° C, eliro aera seka pilko ° C
2. Dehunlldlty volutne testita sub norma testokondiĉo, ĝi varios laŭ la subĉiela / endoma temperaturo malseka pilko.
3. La agordoj de la parametroj de la modelo devas esti ŝanĝitaj laŭ la ĝisdatigo de la produktoj,ni ne sciigos tion speciale, bonvolu preni la nomplaton kiel la plej novan version Why Using Twesix’ Air Source Heat Pump Dryer saving Energy

Completely overcome the shortcomings of open and closed dryer systems, and use their advantages;The open and closed loopdryer system is not affected by the ambient temperature. When the set temperature is reached, the open closed drying methodsare intelligently switched, and the sensible and latent heat recovery system avoids the low heating efficiency in low temperatureenvironments, even at ultra low temperatures. Even without electricity and auxiliary heat in the environment, the drying roomcan be heated up quickly, and the system is more enerv-efficient

Why Using Heat Pump Dryer?
Ni kutime uzas lamenlignon kaj ŝrumpan filmon por paki, uzi kartoskatolon por malgrandaj modeloj,ni ankaŭ povas fari la pakaĵon kiel peton.

1. Aĉeto konsilu
2. Fabrikaj prezoj
3. Produktada kontrolo
4. QC-kontrolo
5. Livero en tempo
6. Subteno post vendado

A. Payment Service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)

B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

C. Postvenda servo
1, Teknika subteno por via instalado, funkciado kaj prizorgado.
2, Unu jara garantio, kaj vi povas pagi por plilongigita garantio.
3, Rezervaj partoj kaj teknika subteno maksimume ekonomiaj prezoj post la garantio
Se vi interesiĝas pri niaj produktoj, bonvolu kontakti nin.

Sendu vian mesaĝon al ni:

DEMANDU NUN
DEMANDU NUN