Avvisi:
1. Condizione di lavoro del riscaldamento A: Palla asciutta all'aperto / palla bagnata 7 ℃ / 6 ℃, temperatura dell'acqua in uscita 45 ℃.
2. Condizione di lavoro del riscaldamento B: Sfera asciutta all'aperto/sfera bagnata -12℃/-14℃, temperatura dell'acqua in uscita 41 ℃.
3. Condizione di lavoro di raffreddamento: Palla asciutta all'aperto / palla bagnata 35 ℃ / 24 ℃, temperatura dell'acqua in uscita 7℃.
4. Il modello, parameters and performance will be changed without notice due to the improvement of the product. Fare riferimento alla targhetta del prodotto per i parametri specifici.

Tecnologia EVI, Funzionamento stabile a temperatura ambiente di -35 ℃ e acqua calda a 65 ℃
The special high efficiency and high compression ration compressor, combinato con la tecnologia EVI a bassissima temperatura, non solo può funzionare normalmente a -35 ℃, ma anche la temperatura dell'acqua in uscita dalla pompa di calore può raggiungere i 65 ℃, realizing the hot water output of high temperatur, meeting the needs of household hot water bath, e fornire una garanzia di riscaldamento per le regioni fredde.

Large-sized fans and appropriate wind runner design are adopted, e il trattamento di riduzione del rumore viene effettuato per i compressori, classe, cabinets etc by means of noise elimination, isolamento, adsorption and other ways. Il rumore delle nostre unità può essere di 42 dB.

The intelligent defrosting technology not only detects the change of outdoor ambient temperature in real time through the outdoor ambient temperature sensor, suction temperature sensor and evaporation pressure sensor, but also judges whether the unit needs to be the defrosting mode by monitoring the change of heat exchanger temperature in real time. Allo stesso tempo, il sistema aggiunge un sistema di sbrinamento intelligente per giudicare il momento migliore per lo sbrinamento, to achieve the defrosting with and without frost. Improve defrosting efficiency to save power-consumption and improve confort.

Il controller intelligente viene utilizzato per realizzare il controllo del collegamento tra l'unità della pompa di calore e l'applicazione terminale per migliorare l'efficienza operativa. Tramite l'APP WIFI, gli utenti possono utilizzare i propri dispositivi dai propri smartphone sempre e ovunque.

1. Flexible Design of Water System, More Convenient Reconstruction

Water system: The water air conditioning system can be modified, added or deleted separately for the indoor unit or outdoor unit in the later period, making the design more flexible.

Fluorine system: the indoor and outdoor reconstruction of traditional fluorine system must be carried out at the same time, and the indoor unit cannot be added later.

2. The Matching of Indoor and Outdoor Units

Water system: any water terminals can be matched with the outdoor unit, without any restrictions, more flexible and independent.

Indoor and outdoor units must come from the same manufacturers. And the later maintenance and replacement are limited.

3. Installation Distance

Liquid water is used as the heat transfer medium inside the indoor units. There is almost no problem of air conditioning capacity decline caused by long connecting pipes. The performance is almost unaffected by the connecting length of water pipes, and the capacity loss is almost zero.

The refrigerant pipeline is used as the heat transfer medium, and the pipeline connection increases the resistance of refrigerant flow, which leads to the failure of compressor capacity and the attenuation of refrigeration capacity. Allo stesso tempo, too high exhaust temperature may increase the amount of refrigerant, increase the cost and repair costs.

4. Investment

Air source heat pump: realize efficient cooling of fan coil in summer; In inverno, floor heating is realized. One set of equipment can meet two needs of families and reduce the investment in equipment in later stage.

Fluorine system central air conditioning+gas wall-mounted furnace: two sets of systems are required to realize air conditioning and floor heating, with high initial investment and complex system maintenance.