Pranešimai:
1. Šildymo darbinė būklė A: Lauko sausas kamuolys / šlapias kamuolys 7 ℃/6 ℃, išleidžiamo vandens temperatūra 45 ℃.
2. Šildymo būklė B: Lauko sausas kamuolys / šlapias kamuolys -12 ℃/-14 ℃, išleidžiamo vandens temperatūra 41 ℃.
3. Darbinė aušinimo būklė: Lauko sausas kamuolys / šlapias kamuolys 35 ℃/24 ℃, išleidžiamo vandens temperatūra 7 ℃.
4. Modelis, parameters and performance will be changed without notice due to the improvement of the product. Norėdami sužinoti konkrečius parametrus, žiūrėkite gaminio vardinę lentelę.
EVI technologija, Stabilus veikimas esant -35 ℃ aplinkos temperatūrai ir 65 ℃ karštam vandeniui
The special high efficiency and high compression ration compressor, derinamas su itin žemos temperatūros EVI technologija, gali ne tik normaliai veikti esant -35 ℃, bet ir šilumos siurblio išleidžiamo vandens temperatūra gali siekti 65 ℃, realizing the hot water output of high temperatur, meeting the needs of household hot water bath, ir suteikia šildymo garantiją šaltiems regionams.
Large-sized fans and appropriate wind runner design are adopted, o kompresoriams atliekamas triukšmo mažinimo apdorojimas, klasė, cabinet etc by means of noise elimination, isolation, adsorption and other ways. Mūsų įrenginių triukšmas gali būti 42 dB.
The intelligent defrosting technology not only detects the change of outdoor ambient temperature in real time through the outdoor ambient temperature sensor, suction temperature sensor and evaporation pressure sensor, but also judges whether the unit needs to be the defrosting mode by monitoring the change of heat exchanger temperature in real time. Tuo pačiu metu, sistema prideda išmaniąją atitirpinimo sistemą, kad būtų galima nustatyti geriausią atitirpinimo laiką, to achieve the defrosting with and without frost. Improve defrosting efficiency to save power-consumption and improve confort.
Išmanusis valdiklis naudojamas šilumos siurblio įrenginio ir terminalo jungties valdymui realizuoti, siekiant pagerinti veikimo efektyvumą. Per WIFI APP, vartotojai gali valdyti savo įrenginius iš savo išmaniųjų telefonų bet kada ir bet kur.
1. Flexible Design of Water System, More ConvenientReconstruction
Water system: The water air conditioning system can be modified, added or deleted separately for the indoor unit or outdoor unit in the later period, making the design more flexible.
Fluorine system: the indoor and outdoor reconstruction of traditional fluorine system must be carried out at the same time, and the indoor unit cannot be added later.
2. The Matching of Indoor and Outdoor Units
Water system: any water terminals can be matched with the outdoor unit, without any restrictions, more flexible and independent.
Indoor and outdoor units must come from the same manufacturers. And the later maintenance and replacement are limited.
3. Installation Distance
Liquid water is used as the heat transfer medium inside the indoor units. There is almost no problem of air conditioning capacity decline caused by long connecting pipes. The performance is almost unaffected by the connecting length of water pipes, and the capacity loss is almost zero.
The refrigerant pipeline is used as the heat transfer medium, and the pipeline connection increases the resistance of refrigerant flow, which leads to the failure of compressor capacity and the attenuation of refrigeration capacity. Tuo pačiu metu, too high exhaust temperature may increase the amount of refrigerant, increase the cost and repair costs.
4. Investment
Air source heat pump: realize efficient cooling of fan coil in summer; In winter, floor heating is realized. One set of equipment can meet two needs of families and reduce the investment in equipment in later stage.
Fluorine system central air conditioning+gas wall-mounted furnace: two sets of systems are required to realize air conditioning and floor heating, with high initial investment and complex system maintenance.