Mataas na Teknolohiya Hot Air Mushroom Dewatering Dehydration Drying Machine

Mataas na Teknolohiya Hot Air Mushroom Dewatering Dehydration Drying Machine

Maikling Paglalarawan:

The working principle of heat pump drying machine: untilize refrigerant compression through the compressor to form the high temperature and high pressure gas.The gas went into the condenser to release heat, the heat will be sent into the chamber by the circulating fan , to heat the air in the chamber(The maximum air temperature up to 75 ). Then the air temperature rises, the moisture in the drying material will gradually evaporate, and then exhaust of the moisture by the fresh air dehumidification system,to achieve the drying effect.

Numero ng Modelo: DPHG150S-PS-P

Detalye ng Produkto

Mga Tag ng Produkto

1.Sa itaas ng mga datas ay nasa ilalim ng kundisyon ng pagsubok: Sa labas ng yunit sa temperatura ng hangin 20 ° C,pumapasok ang hangin na tuyo lahat ng 15 ° C, outlet air dry ball ° C
2. Ang Dehunlldlty volutne ay nasubok sa ilalim ng karaniwang kondisyon sa pagsubok, mag-iiba ito ayon sa panlabas / panloob na temperatura basa na bola.
3. Ang mga modelo ng parameter ng pagganap nlight ay nabago ayon sa pag-update ng mga produkto,hindi namin ito aabisuhan nang espesyal, mangyaring kunin ang nameplate bilang pinakabagong bersyon Why Using Twesix’ Air Source Heat Pump Dryer saving Energy

Completely overcome the shortcomings of open and closed dryer systems, and use their advantages;The open and closed loopdryer system is not affected by the ambient temperature. When the set temperature is reached, the open closed drying methodsare intelligently switched, and the sensible and latent heat recovery system avoids the low heating efficiency in low temperatureenvironments, even at ultra low temperatures. Even without electricity and auxiliary heat in the environment, the drying roomcan be heated up quickly, and the system is more enerv-efficient

Why Using Heat Pump Dryer?
Karaniwan kaming gumagamit ng playwud at pag-urong ng pelikula upang mai-pack, gumamit ng kahon ng karton para sa maliliit na modelo,maaari rin nating gawin ang package bilang kahilingan.

1. Payo ng pagbili
2. Mga presyo ng pabrika
3. Pagkontrol sa produksyon
4. Kontrol ng QC
5. Paghahatid sa oras
6. Suporta pagkatapos ng benta

A. Payment Service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)

B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.

C. Serbisyo pagkatapos ng benta
1, Teknikal na suporta para sa iyong pag-install, operasyon at pagpapanatili.
2, Warranty ng isang taon, at maaari kang magbayad para sa pinalawig na warranty.
3, Mga ekstrang bahagi at suportang panteknikal sa karamihan ng mga presyo sa ekonomiya pagkatapos ng warranty
Kung ikaw ay interesado sa aming mga produkto, pls huwag mag-atubiling makipag-ugnay sa amin.

Ipadala ang iyong mensahe sa amin:

MAGTANONG NGAYON
MAGTANONG NGAYON