Mga pahibalo:
1. Ang kahimtang sa pagtrabaho sa pagpainit A: Sa gawas nga uga nga bola / basa nga bola 7 ℃ / 6 ℃, outlet sa tubig temperatura 45 ℃.
2. Ang kahimtang sa pagtrabaho sa pagpainit B: Sa gawas nga uga nga bola / basa nga bola -12 ℃ / -14 ℃, outlet temperatura sa tubig 41 ℃.
3. Pagpabugnaw sa kahimtang sa pagtrabaho: Sa gawas nga uga nga bola / basa nga bola 35 ℃ / 24 ℃, temperatura sa tubig sa outlet 7 ℃.
4. Ang modelo, parameters and performance will be changed without notice due to the improvement of the product. Palihug tan-awa ang nameplate sa produkto alang sa piho nga mga parameter.

Teknolohiya sa EVI, Stable nga Pagdagan sa -35 ℃ Ambient Temperatura ug 65 ℃ init nga Tubig
The special high efficiency and high compression ration compressor, inubanan sa ultra-ubos nga temperatura EVI teknolohiya, dili lamang modagan sa normal sa -35 ℃, apan usab ang temperatura sa tubig sa outlet sa heat pump mahimong ingon ka taas sa 65 ℃, realizing the hot water output of high temperatur, meeting the needs of household hot water bath, ug paghatag og garantiya sa pagpainit alang sa bugnaw nga mga rehiyon.

Large-sized fans and appropriate wind runner design are adopted, ug ang pagtambal sa pagkunhod sa kasaba gihimo alang sa mga compressor, klase, cabinets etc by means of noise elimination, paglain, adsorption and other ways. Ang kasaba sa among mga yunit mahimong 42dB.

The intelligent defrosting technology not only detects the change of outdoor ambient temperature in real time through the outdoor ambient temperature sensor, suction temperature sensor and evaporation pressure sensor, but also judges whether the unit needs to be the defrosting mode by monitoring the change of heat exchanger temperature in real time. Sa samang higayon, ang sistema nagdugang usa ka intelihenteng sistema sa pag-defrost aron hukman ang labing kaayo nga oras sa pag-defrost, to achieve the defrosting with and without frost. Improve defrosting efficiency to save power-consumption and improve confort.

Ang intelihenteng controller gigamit aron maamgohan ang linkage control tali sa heat pump unit ug sa terminal nga aplikasyon aron mapalambo ang operation efficiency. Pinaagi sa WIFI APP, ang mga tiggamit makahimo sa pag-operate sa ilang mga device gikan sa ilang mga smartphone bisan kanus-a ug bisan asa.

1. Flexible Design of Water System, More Convenient Reconstruction

Water system: The water air conditioning system can be modified, added or deleted separately for the indoor unit or outdoor unit in the later period, making the design more flexible.

Fluorine system: the indoor and outdoor reconstruction of traditional fluorine system must be carried out at the same time, and the indoor unit cannot be added later.

2. The Matching of Indoor and Outdoor Units

Water system: any water terminals can be matched with the outdoor unit, without any restrictions, more flexible and independent.

Indoor and outdoor units must come from the same manufacturers. And the later maintenance and replacement are limited.

3. Installation Distance

Liquid water is used as the heat transfer medium inside the indoor units. There is almost no problem of air conditioning capacity decline caused by long connecting pipes. The performance is almost unaffected by the connecting length of water pipes, and the capacity loss is almost zero.

The refrigerant pipeline is used as the heat transfer medium, and the pipeline connection increases the resistance of refrigerant flow, which leads to the failure of compressor capacity and the attenuation of refrigeration capacity. Sa samang higayon, too high exhaust temperature may increase the amount of refrigerant, increase the cost and repair costs.

4. Investment

Air source heat pump: realize efficient cooling of fan coil in summer; In winter, floor heating is realized. One set of equipment can meet two needs of families and reduce the investment in equipment in later stage.

Fluorine system central air conditioning+gas wall-mounted furnace: two sets of systems are required to realize air conditioning and floor heating, with high initial investment and complex system maintenance.