សេចក្តីជូនដំណឹង:
1. លក្ខខណ្ឌការងារកំដៅ A: បាល់ស្ងួតនៅខាងក្រៅ / បាល់សើម 7 ℃ / 6 ℃, សីតុណ្ហភាពទឹក 45 ℃.
2. លក្ខខណ្ឌការងារកំដៅ ខ: បាល់ស្ងួតខាងក្រៅ / បាល់សើម -12 ℃ / -14 ℃, សីតុណ្ហភាពទឹក 41 ℃.
3. លក្ខខណ្ឌការងារត្រជាក់: បាល់ស្ងួតខាងក្រៅ / បាល់សើម 35 ℃ / 24 ℃, សីតុណ្ហភាពទឹក 7 ℃.
4. គំរូ, parameters and performance will be changed without notice due to the improvement of the product. សូមយោងទៅលើផ្លាកឈ្មោះផលិតផលសម្រាប់ប៉ារ៉ាម៉ែត្រជាក់លាក់.
បច្ចេកវិទ្យា EVI, ដំណើរការមានស្ថេរភាពនៅ -35 ℃ សីតុណ្ហភាពព័ទ្ធជុំវិញ និង 65 ℃ ទឹកក្តៅ
The special high efficiency and high compression ration compressor, រួមបញ្ចូលគ្នាជាមួយបច្ចេកវិទ្យា EVI សីតុណ្ហភាពទាបបំផុត។, មិនត្រឹមតែអាចដំណើរការធម្មតានៅ -35 ℃ប៉ុណ្ណោះទេ, ប៉ុន្តែក៏សីតុណ្ហភាពទឹករបស់ម៉ាស៊ីនបូមកម្ដៅអាចឡើងដល់ ៦៥ អង្សារសេ, realizing the hot water output of high temperatur, meeting the needs of household hot water bath, និងផ្តល់ការធានាកំដៅសម្រាប់តំបន់ត្រជាក់.
Large-sized fans and appropriate wind runner design are adopted, និងការព្យាបាលកាត់បន្ថយសំលេងរំខានត្រូវបានអនុវត្តសម្រាប់ម៉ាស៊ីនបង្ហាប់, ថ្នាក់, cabinets etc by means of noise elimination, ការដាក់ឱ្យនៅដាច់ដោយឡែក, adsorption and other ways. សំលេងរំខាននៃគ្រឿងរបស់យើងអាចមាន 42 dB.
The intelligent defrosting technology not only detects the change of outdoor ambient temperature in real time through the outdoor ambient temperature sensor, suction temperature sensor and evaporation pressure sensor, but also judges whether the unit needs to be the defrosting mode by monitoring the change of heat exchanger temperature in real time. ក្នុងពេលដំណាលគ្នា, ប្រព័ន្ធបន្ថែមប្រព័ន្ធ defrosting ឆ្លាតវៃដើម្បីវិនិច្ឆ័យពេលវេលាដ៏ល្អបំផុតសម្រាប់ការ defrosting, to achieve the defrosting with and without frost. Improve defrosting efficiency to save power-consumption and improve confort.
ឧបករណ៍បញ្ជាឆ្លាតវៃត្រូវបានប្រើដើម្បីដឹងពីការគ្រប់គ្រងទំនាក់ទំនងរវាងអង្គភាពបូមកំដៅ និងកម្មវិធីស្ថានីយ ដើម្បីបង្កើនប្រសិទ្ធភាពប្រតិបត្តិការ។. តាមរយៈកម្មវិធី WIFI, អ្នកប្រើប្រាស់អាចដំណើរការឧបករណ៍របស់ពួកគេពីស្មាតហ្វូនរបស់ពួកគេបានគ្រប់ពេលវេលា និងគ្រប់ទីកន្លែង.
1. Flexible Design of Water System, More Convenient Reconstruction
Water system: The water air conditioning system can be modified, added or deleted separately for the indoor unit or outdoor unit in the later period, making the design more flexible.
Fluorine system: the indoor and outdoor reconstruction of traditional fluorine system must be carried out at the same time, and the indoor unit cannot be added later.
2. The Matching of Indoor and Outdoor Units
Water system: any water terminals can be matched with the outdoor unit, without any restrictions, more flexible and independent.
Indoor and outdoor units must come from the same manufacturers. And the later maintenance and replacement are limited.
3. Installation Distance
Liquid water is used as the heat transfer medium inside the indoor units. There is almost no problem of air conditioning capacity decline caused by long connecting pipes. The performance is almost unaffected by the connecting length of water pipes, and the capacity loss is almost zero.
The refrigerant pipeline is used as the heat transfer medium, and the pipeline connection increases the resistance of refrigerant flow, which leads to the failure of compressor capacity and the attenuation of refrigeration capacity. ក្នុងពេលដំណាលគ្នា, too high exhaust temperature may increase the amount of refrigerant, increase the cost and repair costs.
4. Investment
Air source heat pump: realize efficient cooling of fan coil in summer; In winter, floor heating is realized. One set of equipment can meet two needs of families and reduce the investment in equipment in later stage.
Fluorine system central air conditioning+gas wall-mounted furnace: two sets of systems are required to realize air conditioning and floor heating, with high initial investment and complex system maintenance.